Bender ISOMETER iso685-D-P, Manual

Page: 58 / 90

Settings Settings
iso685-D-P_D00170_00_M_XXDE/06.2016
58
10.1 2.5.2 Current transformer monitoring
Refer to “10.1 2.4.1.2 CT monitoring” .
10.1 2.5.3 Response value I
ΔL
Refer to “10.1 2.4.1.3 I∆L Response value” .
10.1 2.5.4 Response value I
Δn
Refer to “10.1 2.4.1.4 I∆n Response value” .
10.1 2.6 Outputs
In this menu, each output can be configured. Also refer to “10.1 2.4.2 Outputs” .
10.1 2.6.1 Relays
Select the relay that you would like to configure.
...
10.1 2.6.1.1 TEST
Refer to “10.1 2.4.2.1.1 TEST” .
10.1 2.6.1.2 Operating mode
Refer to “10.1 2.4.2.1.2 Operating mode” .
10.1 2.6.1.3 Function 1
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.1.4 Function 2
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.1.5 Function 3
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.2 Buzzer
In this menu, each buzzer can be configured. Also refer to “10.1 2.4.2.2 Buzzer”.
10.1 2.6.2.1 TEST
Refer to “10.1 2.4.2.1.1 TEST”.
10.1 2.6.2.2 Function 1
Refer to “10.1 2.4.2.1.3 Function 1” .
•Relay 1 (BS 2/1)
10.1 2.6.2.3 Function 2
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.2.4 Function 3
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.3 Digital output
In this menu, each digital output can be configured.
Also refer to
“10.1 2.4.2.3 Digital output”.
10.1 2.6.3.1 TEST
Refer to “10.1 2.4.2.3.1 TEST” .
10.1 2.6.3.2 Function 1
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.3.3 Function 2
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.6.3.4 Function 3
Refer to “10.1 2.4.2.1.3 Function 1” .
10.1 2.7 Inputs
In this menu, each digital input can be configured. Therefore, select a digital input.
10.1 2.7.1 Mode
Refer to “10.1 2.4.3.1 Mode” .
10.1 2.7.2 t(on)
Refer to “10.1 2.4.3.2 t(on)” .
10.1 2.7.3 t(off)
Refer to “10.1 2.4.3.3 t(off)” .
10.1 2.7.4 Function
Refer to “10.1 2.4.3.4 Function” .
•Dig. input 1 (BS 2/1)
•Dig. input 2 (BS 2/2)