Benchmark AMS4A040, Operation And Maintenance Manual, Page: 13 / 39

AMS4A040 PANEL USER MANUAL Rev H Nov 2006 Page 13 of 39
3.11 ENCODER DIRECTION
Functionality: The value selected will toggle the encoder direction between
UP and Down.
Procedure: Use +/- switch to set the ENCODER direction setting.
Indication: ENCDIR will be displayed on the DEPTH display and either
UP or DN value will be displayed on the TENSION display.
Default value is UP.
3.12 ENG – MET UNITS
Functionality: The depth and tension values will be displayed in the units
selected.
Procedure: Use +/- switch to set the MEASUREMENT UNITS setting.
Indication: UNITS will be displayed on the DEPTH display. The
selection can be toggled through any combination of English
or Metric units. The selection will be displayed on the
TENSION display. The ENGLISH (green) LED display will be
lit when FT – LBS is selected and the METRIC (red) LED will
be lit when in any of the other modes.
Selection:
FT - LBS
FT - KG
MT - LBS
MT - KG
Default value is FT – KG
3.13 MMD PLAYBACK
Functionality: The depth of the first 25 detected marks is stored in memory
and can be played back.
Procedure: Use +/- switch to toggle through all of the marks that have
been detected. This starts from the last mark detected.
Pressing depth 0 will clear all the stored marks.
Indication: MMD DP will be displayed on the DEPTH display and the
mark depth will be displayed on the TENSION display.