BenchBUD Electric Height Adjustable Workbench, Instructions Manual, Page: 8 / 12

K&A Manufacturing • 800.298.4351 • www.benchbud.com 8 of 12
Step 10
Step 9
• Mount control switch (S) to worksurface
using two wood screws (H)
.
• For standard install location, align switch
with pre-drilled pilot holes.
A C H
NOTE: Please refer to the installation instructions included with switch.
• Mount control box (T) to worksurface
using two wood screws (H)
.
• For standard install location, align
control box with pre-drilled pilot holes.
However, it can be installed in any
location, wire lengths permitting.
NOTE:
Table will
NOT
operate unless the control box (T) is
screwed tight into the table without any play.
Required Orientation:
Long side of control box must
run parallel to the long side of
the worksurface.
A
C H
Left Leg
H
Control
Box
Required Orientation
S