S.p.A.
FT 530- FT 533
10
•
Also the front wheel should be greased, through the greasing hole, ( Pos. C in Pict.9).
•
Lubricate with grease the wheel-hubs , after removing the wheels from the shaft, unscrewing the screw (Pos. 14 in
Pict.1),and leave some grease on the bearings.
•
All the control cables should be lubricated, adding grease into the sheathing.
•
Carefully cleaning all the machine, removing dust and mowing rests from the internal deck. Don’t use high
pressure cleaning machines, better a brush or an air compressor.
-Pict
n°10 - - Pict. n°11-
Pict. N°12
WARRANTY
The machines and accessories are guaranteed for 2 years, with the exception of electrical parts or parts in rubber. The
manufacturer shall replace pieces recognized as defective free of charge. Labour and transport shall be at the expense of the
purchaser. Warranty requests must be made through dealers authorized by the manufacturer.
With regard to materials not of our manufacture, with special reference to the motor, the rules laid down by the respective
manufacturers shall apply. Any requests for repair shall therefore be directed to the specific service centres in the respective areas.
For any problem or repair, contact the dealer where the machine was purchased.
SAFETY TESTS AND CERTIFICATION
Declaration of CE conformity in accordance with EEC directive 89/392 and amendments.
