20 BEN-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
www.ben-e-bike.net
[email protected]
SAFETY INSTRUCTIONS FOR BATTERY USE
Lithium-ion batteries are classified as so-called "Dangerous Goods Class 9" -
therefore it is mandatory to follow the subsequent instructions carefully!
TURNING THE BATTERY ON
The battery needs to be switched on via the red button before it provides power for the display, controller
and motor at its output. When switched off, the battery terminals are powered-off. Always turn off the
battery when the BEN-E-BIKE is not in use or before removing the battery. The battery also recognizes by
itself whether it is in use or not. As soon as no current is drawn for more than 60 minutes, the battery output
switches off automatically. To restart, you must then turn off the red switch once and turn it on again after
approx. 2 seconds!
CHECK THE CHARGE CONDITION
Shortly press the small button to activate the LED charging indicator. This will show the current state of
charge for about 5 seconds. However, this display does not reliably reflect the actual state of charge. The 4-
digit display may differ from the 5-digit bar graph in the display. If in doubt, rely on the display on the
handlebar!
