background image

7

   Carefully read the safety instructions before first use.

   Each Bemoov bike is adapted to the weight of the child  

 

of the age corresponding to the model. Please respect  

 

the authorized weight limit:

 

BEMOOV 12 : maximum 25 kg.

   Your Bemoov balance bike has been designed to be 

 

ridden by young children on gently rolling, smooth 

 

pavement.  If your child uses their bike beyond its limits, 

 

there is a real risk of failure that could lead to serious 

 injury.

   Our balance bike does not comply with the highway 

 

code. It should therefore not be used on public roads

   Make sure your child always wears a suitable helmet 

 

when riding a bike.

   Make sure the helmet is properly fitted according to the 

 

manufacturer’s instructions.

   Make sure your child wears protective clothing.

   Make sure your child wears sturdy, non-slip shoes. Check 

 

that nothing can get tangled in the pedals or transmission 

 

the wheels . Never ride barefoot

   Make sure your child can get to know the new balance 

 

bike in a safe environment under your control. Never let 

 

your child ride unsupervised. Never let your child ride 

 

near steep slopes, stairs, or bodies of water.

   Make sure your child quickly understands how the 

 

rear brake works. This skill is not always picked up easily 

 

in very young children. That is why a responsible adult 

 

must always be present. Check if it can stop at all times 

 

and safely by using the brake lever or by putting his/her 

 

feet on the ground.

 

   Avoid allowing your child to ride in wet weather and on 

 

slippery ground. Be aware that braking and tire grip 

 

performance will be significantly reduced in these 

 conditions.

   Please ensure that children are aware that balance bikes  

 

have moving parts and that they cannot touch them 

 

when they are in motion. Spokes, tires, and other moving 

 

parts an cause serious injury if contacted during 

 

movement. This risk exists even if the bicycle is not in 

 motion.

   To avoid risk of choking, make sure your child cannot 

 

loosen and detach the tire valve cap. Otherwise, it should 

 

be removed completely.

   Make sure that the steering angle limiter (designed to 

 

prevent over-steering) is always securely connected to its 

 mounting.

   Crashes are sometimes unavoidable when riding a ` 

 

bicycle. As the bicycle is made up of sharp and hard 

 

metal objects, these crashes can cause injury. After a fall, 

 

first check if the child is okay. Then check the general 

 

condition of the balance bike  and its components before 

 

the child can get back on the balance bike. 

SAFETY INSTRUCTIONS AND GUIDELINES FOR USE

If you are the responsible adult, parent or guardian, we recommend that you read the safety instructions carefully before first 

use.

A. GENERAL

Our balance bike bears the CE mark and therefore complies with the requirements of European standard 71 (toy 

safety) and fulfills the requirements of the European directive 2009/48/EC on the safety of toys

ATTENTION !

!

Summary of Contents for M12














Reviews: