5
STEP 1 :
Turn the handlebar counterclockwise and align it with the
front wheel
STEP 2 :
Tighten the two stem clamping bolts clockwise until you feel
sufficient resistance for the stem to be properly fixed (maxi-
mum tightening torque: 6 Nm*)
*Newton meter
Failure to tighten the various stem bolts correctly can lead to serious accidents. To check that the handlebar is
firmly fixed, take hold of the handlebar grips with both hands:
-
Securing the front wheel between your legs, take the handlebar grips with both your hands.
-
Check by turning left and right that the stem is firmly attached to the fork crown.
No movement should be observed. If there is still movement, tighten the various bolts to reach the maximum
tightening torque of 6 Nm. If in doubt, check the technical information or contact our support team via our
website www.bemoov-bikes.be
ATTENTION !
!
B. ADJUSTING THE HANDLEBARS
