6
You should feel some clamping pressure when the QR lever is closed. The degree to which the clamp is
tightened can be modified by adjusting the nut when the lever is open: turn it clockwise to tighten or coun-
terclockwise to release.
Never mount the seat post above its maximum allowable height, indicated by an engraving on the seat
post, since this could break the seat post or the seat tube
ATTENTION !
!
C. ADJUSTING THE SADDLE HEIGHT
STEP 1:
Open the quick release
STEP 2:
Adjust the saddle height so that your child can have his/her
feet on the ground when sitting on the saddle.
STEP 3:
Close the quick release
D. TIRE PRESSURE
It is possible that during transport the tire pressure will go down. If necessary, refer to the BAR/PSI pressure indicated on the
sidewall of the tires to adjust this pressure using a bicycle pump.
