Putting into operation
WUFA_vers02.doc
19 of 29
6
Chapter
6.3 Height adjustment of the support
rollers
Depending on the height of the standing
seam profiles it may be necessary to ad-
just the support rollers (
5
) in the height on
both sides of the seaming machine.
Figure 4: Height adjustment of the support
rollers
Open the lever (
4
) fully for it.
Loosen the two Allen screws (
5A
) on
both sides of seaming machine, and
move the suspension (
5B
) for the bear-
ing rollers, depending on the height of
the standing seam profile, up or down.
Then reattach the related suspension
with support rollers and (
4
) close the
lever again.