Description
WUFA_vers02.doc
14 of 29
3
Chapter
3.2 Intended use
The seaming machine is determined for
the close of the
standing seam profile
types N65 / N50 / VF65
for sheet metal
roofs and facades of the
BEMO SYSTEM
GmbH
. The machine may only be used in
the procedure described in this operating
manual. The
machine
is not intended for a
type of use other than that described
above - this is considered as inappropriate
use.
The intended use also includes observing
all the instructions in this operating manu-
al, in the assembly instructions for BEMO
SYSTEMS standing seam profiles and ob-
serving the maintenance work.
BEMO
SYSTEMS GmbH
is not liable for damage
caused by incorrect use or failure to ob-
serve these operating instructions!
3.3 Foreseeable misuse
Failure to observe the instructions in
Chapter
Intended use
Machine is operated by untrained
artisans or amateurs.
Training / instruction by other per-
sons or by a company other than
BEMO SYSTEMS GmbH is not per-
mitted.
Machine is not monitored during the
seaming.
The machine is not connected to the
safety cable before use and the safety
cable is not attached or connected to
the operator.
The lever is not closed before switching
on the machine.
Getting on the machine with your feet.
Operation / use of the machine in case
of rain or snow.
Processing of profiles other than those
specified in these operating instruc-
tions.
Transporting of the machine or the car-
rying case as a floating load.
Work overhead.
Loss of control over the machine.
Use of the machine in a potentially ex-
plosive area.
Use of non-original spare parts.