background image

26

27

SPECIFICATIONS

ITEM

BEMIS HAVEN 1000

Rated voltage

120V, 60Hz

Max. Power consumption

870W

Power cord length

1.2 m

Water feed method

Directly connects to water pipe

Recommended inlet  

water pressure

99~106.6 psi

Wash

Feed 

Volume

Wash

0.13~0.21 gal/min

Bidet

0.13~0.18 gal/min

Turbo

0.13~0.18 gal/min

Child

0.13-0.16 gal/min

Pressure control

5 levels

Temperature control

4 levels (off-low-middle-high)

Heater capacity

800W

Safety device

Water level sensor, Thermal fuse,  

Bi-metal, Temperature sensor

Heated Seat

Temperature control

4 levels (off-low-middle-high)

Heater capacity

55W

Safety device

Thermal fuse

Feed water temp.  

tolerance range

37~95°F (recommended 54~95°F)

Usage room temp.  

tolerance range

37~104°F (recommended 54~95°F)

Dimension

Elongated

18.5”(470) x 20.8”(528) x 6.8”(173)

Weight 

Net Weight 

(Gross 

weight)

Elongated

10.4 lb (15.2)

 

WARRANTY

1 YEAR WARRANTY

Your product is warranted against defects in materials or workmanship for (1) year from 
the date of original purchase. Defective parts or a defective products returned to Bio Bidet 
Innovation LLC will be repaired with new or comparable rebuilt parts or exchanged for a 
refurbished product as determined by Bio Bidet Innovation LLC in their sole discretion. 

This limited warranty given by Bio Bidet Innovation LLC covers all defects encountered in 
normal product use, and do not apply in the following cases: 

1.  Loss of or damage to product due to abuse, misuse, tampering. Mishandling, improper 

packaging by you, alteration or fail to follow operating instructions. 

2.  Use of parts or supplies (other than those by Bio Bidet Innovation LLC dealers that cause 

damage to product. 

3.  Replacement of discolored or stained parts caused by chlorine, bleach,  

ammonia and other chemicals, cleaning supplies, oxidation, normal wear  
and tear. 

4. Damage to or malfunction of the unit as a result of improper and  

negligent installation. 

5.  Any and all damages to plumbing, walls, floors, ceiling and personal properties resulting 

from water leaks or breakage. The product must be used at the user’s own risk. 
Therefore, the owner hereby releases the manufacturer and distributor from any and all 
claims for damages where the above condition exits. 

No implied warranty, including any implied warranty of merchantability or fitness or a 
particular purpose, applies to Bio Bidet Innovation LLC bidet after the applicable period of the 
express limited warranty stated above, and no other express warranty or guarantee, except as 
mentioned above, given by any person or entity with respect to Bio Bidet Innovation LLC shall 
bind Bio Bidet Innovation LLC, (Some States and provinces do not allow limitations on how 
long an implied warranty, so the above limitation may not apply to you) Bio Bidet Innovation 
LLC shall not be liable for revenues or profits, inconvenience, expense for substitute equipment 
or service, or any other special, incidental or consequential damages caused by the use or 
misuse of, or inability to use product, regardless of the possibility and foresee-ability of such 
damages. In no event shall recovery of any kind against Bio Bidet Innovation LLC be greater 
in amount than the purchase price of the product and causing the alleged damage. Without 
limiting the foregoing, you assume all risk and liability for loss, damage or injury to you and 
your property and to others and their property arising out of use or misuse of, or inability to 
use, the product not caused directly by the negligence or Bio Bidet Innovation LLC. This limited 
warranty shall not extend to anyone other than the original purchaser of the product. 

Summary of Contents for HAVEN 1000
















Reviews: