24
25
OPERATION (CONT.)
9. Energy Saving Function
10. Nozzle Cleaning
•
Automatic energy
saving mode.
This mode is activated by
pressing the Energy Saving
button until yellow LED lights up.
(Seat and water temperature will
be kept at 89°F)
•
Powerful energy saving mode
This mode is activated by
pressing the Energy Saving
button until green LED lights up.
(Seat and water heater will be
kept off)
•
Deactivated energy
saving mode
Press the Energy Saving button
until LED lamp turns off.
•
When the unit is occupied, it
adjusts to the preset temperature
and it returns to the saving mode
when seat is unoccupied.
•
If the seat and water temperature
are off they will remain off.
•
When selecting Nozzle Cleaning
while not seated, the nozzle
cleans itself 3 times. The nozzle
extends and stops for manual
cleaning process.
•
Clean the nozzle with a brush
and press STOP button after
completion of manual cleaning.
Then nozzle cleans itself for 3
times and retracts.
•
NOZZLE CLEANING will
not operate if the seat
sensor is activated.
11. Night Light
12. Automatic Tank Draining
•
Blue LED night light provides
enough brightness to see the
toilet without turning on the
bathroom light.
•
Night light can be turned on and
off by pressing “+” for 3 seconds
while not seated.
•
Night light setting cannot be
adjusted if seat sensor bypass
feature is activated.
•
To protect from water
contamination, the water tank
will be drained (replaced) for 2
minutes if the seat is not used for
48 consecutive hours.
•
This feature is deactivated from
the factory. To activate this
feature, press Stop and Water
Temp. button for 3 seconds.
