16
17
WATER CONNECTION GUIDE
INSTALLATION (CONT.)
DO NOT plug in until
installation is finished
completely. Not doing so
may damage the appliance.
If electric work is
needed, please contact
a qualified electrician or
serviceman only.
•
Slide the unit onto the
mounting plate until it clicks.
•
To detach the unit, lift upward
and forward.
•
After installing your
bidet attachment, check to
see if there is a gap between
the toilet base and toilet seat.
3. Attach the unit
•
Close the shutoff valve
by turning it clockwise.
•
Then flush the water
tank completely to
empty it.
•
Remove the existing
water supply hose
from the water tank.
•
Install the T-valve
on the water tank.
•
Connect one end
of the water supply
hose (7/8 to 3/8)
from the T-valve to
the shutoff valve.
2W ater tank
4
6
6
5
1
7
5
T-valve
Water supply hose
(7/8” to 3/8”)
Water supply hose
(1/2” to 1/2”)
Optional 1/2” Spare Nut
(Available by request)
To the unit
Main unit
•
Connect the other end of the water supply hose (1/2 to 1/2) from the
T-valve to the main unit.
•
Open the shutoff valve by turning it counter clockwise.
•
Check for any water leaking or dripping.
Using an Inline Carbon Filter
The use of an external inline carbon water filter is not required unless the unit
is used in an area with extreme hardwater. If a carbon filter is used, the filter
must be replaced every 6 months. Inline carbon filters can be purchased
from any authorized Bio Bidet reseller.
NOTE:
This product is designed and intended for use exclusively with Bio Bidet
USPA water filters. The purchase or use of any other water filter is not the
responsiblity of BBC Innovation LLC. As such, any use of non USPA water
filters is prohibited and will void the warranty for those Bio Bidet products.
Bio Bidet will not be responsible for any resulting damages or claims related
to the misuse or distribution of non Bio Bidet Uspa filters.
Summary of Contents for bioBidet UB-4800
Page 1: ...OWNER S MANUAL UB4800 ...