18
19
TRIAL OPERATION
•
Open the water supply
valve by turning it
counterclockwise.
•
Be sure that the nozzle
comes out and retracts
when powered on.
•
Don’t plug the power cord
with wet hands. Risk of
electric shock.
•
Place your hand on the
occupied sensor of the seat.
The unit will fill with water.
Check if water comes out
from drain hold next to the
nozzle for 1-2 seconds.
•
Check that there are no leaks
around the hose connection.
1.
Open Water Supply
2.
Check For Leaks
3.
Nozzle
4. Test
PRODUCT DISASSEMBLY
1.
Unplug Power
2.
Close Water Supply Valve
3.
Drain Water
4. Release & Remove
•
Unplug the power
plug from the outlet.
•
Press and release/drain
button on the side of bidet.
Completely drain the water
out of the main body. While
pressing the button, pull the
main body forward and then
remove it from the toilet.
•
Release the nuts, and then
remove the brackets from
the toilet.
•
Close the water supply valve
by turning it clockwise.
Completely drain out the
toilet water tank, release the
nuts at bidet body of the
bidet hose, and then remove
them from the main body.
