55
en
es
fr
54
B.SCAN
Changing the B.SCAN battery
•
Remove both screws (see Fig. 1).
•
Now carefully remove the back panel.
•
Now slide the old battery sideways
(in the direction of the arrow) away
from its holder (see Fig. 2).
The B.SCAN is integrated into your B.BOX and is designed to
check your BEMER products along with safety precautions for
their proper operation. The B.SCAN makes the specific BEMER
Signal configuration audible.
The B.SCAN is a not a diagnostic device and should be only used
audibly to determine if the BEMER field is being emitted from
the applicator.
The device is switched on by pressing the button once; pressing
and holding the button down (for several seconds) will switch
off the device. If no signal is detected, the B.SCAN will automat-
ically switch off after 10 seconds.
1
2
•
Now slide the new battery (type CR 2032)
into the holder. Please note the “+ pole”
battery symbol (see Fig. 2).
•
Now place the back panel back onto the
device and screw it back together.
