![background image](http://html1.mh-extra.com/html/beltronics/vector-945/vector-945_owners-manual_2730804011.webp)
Controls and Features
POWER-UP TEST SEQUENCE/
START-UP MODE
Press the
PWR
button to turn the unit
ON
.
Depending upon the Operating Mode
selected, the power up test sequence and
confirmation of Radar/Laser/SWS
™
alerts
will be relayed to you as follows:
NORMAL
(Factory Pre-Set Mode)
A lengthy, power up test sequence that
displays audio and text messages for
laser, Ka, K, X and Safety Warning
System
®
(SWS
™
) followed by the status
of the General Selectable Features each
time the unit is turned on. When
complete, unit is ready for operation
and will display Radar, Laser and SWS
™
messages when signals are detected.
Normal Mode is recommended when
first using your
V945
.
MODS
(Modifications Mode)
Presents audio and text messages for
Laser, Ka, K, X and Safety Warning
System
®
(SWS
™
), followed by ONLY
those Selectable Features which have
been modified by the user from their
Factory pre-set state each time unit is
turned on. Unit is ready for operation
and will display Radar, Laser and SWS
™
messages when signals are detected.
Q-START
(Quick-Start Mode)
Unit will bypass the power up test
sequence and will display the last
selected traveling mode:“
Au t o S c a n
™
”
(factory default) “
H i g h w a y
”, “
C i t y
X
” or “
Ci t y ALL
”. Q-Start is
recommended when you are
comfortable with the detector and do
not require a rundown of sample
messages. Unit is ready for operation
and will display Radar, Laser and SWS
™
messages when signals are detected.
8
Whichever Operating mode you select,
V945
will be in standby mode and
ready to detect traffic Radar, Laser and
SWS
™ signals. The display will show
“
Au t o S c a n
”
(factory pre-set which is
suitable for ALL driving conditions, unless
you change this to
“
Hig h w a y
”
,
“
C i t y X
”
or
“
Ci t y ALL
”
(see page 12).