![background image](http://html1.mh-extra.com/html/beltronics/express-925/express-925_owners-manual_2730766011.webp)
Entering Selectable Features Mode
1. With the unit
OFF
, press and hold the
CITY
button then press
the
PWR
/
VOL
button. The amber X
LED
will illuminate and a short
“beep” will sound.
2. Immediately after the “beep”, digit #1 will appear and indicate
the status of the sws
™
Selectable Feature. To select digit #2 (
VG
-2
Guard
®
), press the
CITY
button again. To select digit #3 (sws
™
Voice), press the
CITY
button a third time and to select digit #4
(Digital Voice prompts for Radar/Laser/
VG
-2 Guard
®
) press the
CITY
button once again. Use the
CITY
button to select one of the
four digits.
3. If the selected digit is
solid
, feature is
ON
, but may be canceled
by pressing the
AUDIO
button. Two “beeps” and the flashing digit
will confirm feature is
OFF
.
4. If the selected digit is
flashing
, the feature is
OFF
, but may be
activated by pressing the
AUDIO
button. A single “beep” and
solid
illumination will confirm the feature is
ON
.
5. Press the
PWR
/
VOL
button to retain your new settings for Selectable
Features. Two “beeps” will confirm that you have exited from
Selectable Features Mode and your unit will be
ON
.
General Guidelines
Do not mount your unit directly behind windshield wipers or
mirrored sunscreens which block Radar and Laser signals
and substantially reduce warning range. Unlike “after market”
mirrored sun-screens, regular tinted glass does not affect
Radar reception.
Radar signals are also reflected by the “heated windshields”
known as lnstaclear
®
and ElectriClear
®
available as an option on
some vehicles. This type of windshield makes any dash, visor or
windshield mounted detector ineffective. (If in doubt, check with
an appropriate dealership to see if this applies to your vehicle.)
Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy
.
INSTALLATION
10