3.
Use a screwdriver or a small coin to adjust the angle of the
suction-cup mount until the base plate is level.
4
.
Slide detector onto base plate until it snaps into place.
Note—some vehicles have a plastic coating on the inside of the
windshield designed to protect occupants in case of an accident.
Use of the windshield bracket on this type of windshield can
permanently mark the surface. Check with your dealer if you
are unsure whether your vehicle is equipped with this type of
windshield.
Visor Mounting
1
.
Remove the mounting bracket cover by pressing on the
raised dots and pushing outward. Store the cover in a
safe place.
2
.
Slide the visor clip onto the top of the detector until it snaps
into place. Clip the detector to the edge of the sun visor nearest
the windshield.
Fuse Replacement
If the fuse has blown, remove the tip from the lighter plug
followed by the old fuse. Replace the fuse with a 1-amp,
fuse. Defeating the fuse protection can damage your unit or
your vehicle’s electrical system and will void your warranty.
12893 Bel Express 936 Manual 4/26/01 2:30 PM Page 12
Summary of Contents for E936CS
Page 25: ......