34
10. BELTRAME CONFIGURATOR: THE PC SOFTWARE
The S2014 Config is useful during the regulator commissioning, or in case of troubleshooting activities.
10.1 Connection between AVR and PC
For the PC-AVR connection we recommend the following diagram, with USB isolator Using an USB/RS485 cable (Beltrame’s production –
available as optional):
10.2 Installation and Communication setup
The S2014Config is distributed as a zip file. Once unzipped, the software will create a folder with inside the S2014Config.exe:
To run the program, double click on S2014Config.exe. It will open the Comm window.
To operate it is necessary to establish the communication between PC and AVR, see the following instructions:
3. Select here the COM door
number
1. Select the Bitrate (38.4
Kbit/s as default)
2. Press Connect to open the
communication
WARNING!
The PC software allows to modify the working mode and the settings of the AVR. The modification can be
potentially dangerous. Only specially instructed personnel must carry out AVR’s setting adjustments. The
maintenance personnel must be informed about the emergency shutdown measures and must be capable of
turning off the system in case of emergency.
USB Isolator
Example:
KETEREX
KX USB-150
Standard
USB cable
Beltrame cable
(USB-RJ45)
CN2
RS845
BELTRAME
CENTRO SERVIZI ENERGIA
Summary of Contents for S2014
Page 1: ...Rev 4 0 BELTRAME CENTRO SERVIZI ENERGIA...
Page 2: ......
Page 40: ...39 BELTRAME CENTRO SERVIZI ENERGIA...