Beltone myPAL Pro, Instructions For Use Manual

Page: 14 / 27

26 27
i
Note: The myPAL Pro will revert to its default level for all
modes when restarted.
The Beltone Direct™ Remote Control (optional accessory) can
also be used to adjust the streaming volume in the hearing instru-
ment. Please ask your hearing care professional for more infor-
mation about this accessory.
Mute
The signal from the myPAL Pro can be muted, should the wearer
of the device want to engage in conversations or activities irrel-
evant for the hearing instrument user.
• To mute the signal press the Mute button (see page 9) once.
The Mute LED will now start blinking orange.
• To unmute the signal press the Mute button once. The Mute
LED will now stop blinking orange.
Note: Changing mode or restarting the myPAL Pro, while muted,
will unmute the signal.
Volume control and mute
Volume control
myPAL Pro is designed to provide a comfortable listening level
from the moment it is activated. However, for some devices or lis-
tening environments you may want to adjust the volume. This can
be accomplished in a variety of ways. Keep in mind that volume
adjustments apply to the streamed signal only.
• Use the “+” and “-“ buttons (see page 9) to adjust volume to a
comfortable level.
Every volume change on the on the myPAL Pro will be indicated
by a short blink of the Mute LED. When reaching the maximum or
minimum volume level the Mute LED will show a longer (1 second)
steady orange light.
Volume
Blink