Belt-Way Scales Conveyor Belt Scale Product Manual Download Page 6

Page: 6 / 44

Phone: (815) 625-5573

beltwayscales.com

[email protected]

Page 6 of 44

Conveyor Belt Scale

Product Manual

Scale Accessories

The Belt-Way conveyor belt scale works with a range of accessories
designed to maximize accuracy, efficiency, and safety.

Visit

beltwayscales.com

or call us today for a complete li st of all the

accessories that Belt-Way has to offer.

•

Angle Sensor

The angle sensor eliminates the need for constant recalibration
when the scale is installed on a variable angle conveyor or portable
machine.

•

Junction Box

A junction box can be installed on the conveyor to place
the scale integrator up to 1000 ft. from the scale.

•

IO Board

The IO board allows the scale to interface with a PLC system, automate
loadout of trucks and rail cars, or control a VFD to blend multiple
products.

•

Outdoor Protection Enclosure

Heavy duty enclosure offers extra protection for the scale integrator.
Includes power switch.

•

Wireless Multi-Scale Remote Display

The remote display allows multiple scales to be viewed from one
location. Monitor production, clear weight, and perform zero calibrations.
Wireless communication makes installation simple and cost effective.

•

Plant Connect - Online Scale Production Reporting

Our Plant-Connect website allows users to monitor belt
scale production on a PC, tablet or smart phone.

Summary of Contents for Conveyor Belt Scale













































Search results

Summary of Contents for Conveyor Belt Scale

Reviews:

Related manuals for Conveyor Belt Scale

Brands by name

Popular brands

Belt-Way Scales Conveyor Belt Scale, Product Manual

Search results

Summary of Contents for Conveyor Belt Scale

Reviews:

Related manuals for Conveyor Belt Scale

Brands by name

Popular brands