Belshaw Bros., Inc.
•
1750 22
nd
Ave. S.
•
Seattle, WA 98144
•
Phone 206-322-5474
•
Fax 206-322-5425
Thermoglaze 50
MN-1716EN
25
THE PUMP MOTOR WILL NOT RUN
Possible Causes
What To Do
The connection of the power cord to the power
source is faulty.
Make sure the power cord is fully plugged in to a
proper power source.
The circuit breaker has been tripped.
1. Disconnect from power.
2. Open electrical enclosure.
3. Reset circuit breaker.
4. Close electrical enclosure.
THE FILL HOSE IS LEAKING
Possible Causes
What To Do
Fill hose is leaking at the connection.
Hose bracket needs adjusting or tightening.
Fill hose is leaking near the pump.
Check for missing or damaged o-ring.
