Belshaw Bros., Inc.
•
www.belshaw.com
•
Phone 206-322-5474
•
Fax 206-322-5425
Type F-YRD
MN-1557EN-0117
5
Installation
1
Unpacking the Cutter
To unpack the Cutter:
1. Unpack and remove all the packing materials
from the machine, including tape foam and
pieces of paper.
NOTE
: If there is damage,
notify the shipping company immediately.
4. Thoroughly wash the machine using warm
water and mild cleaner. (See Section 3 for
cleaning instructions).
5. Rinse off the cleaner and dry the machine.
Electrical Installation
To start the Type F cutter, turn the switch located
on the motor to ON. The extruder is cycled by
the actuation trigger on cutter. Please see Wiring
Diagram inserted in the Technical Supplement.
