Belshaw Bros., Inc.
•
www.belshaw.com
•
Phone 206-322-5474
•
Fax 206-322-5425
4
MN-1557EN-0317
Type F-YRD
Preface
UTILITY REQUIREMENTS
Electricity
8.0 amperes at 120 Volts, 60 Hertz, 1 Phase
The F-YRD Cutter is designed to cut yeast-raised
ring donuts. It is not designed to do anything
else.
The operator must work safely at all times and
read this manual and follow its instructions and
warnings. A thorough understanding of how to
install, maintain, and safely operate the cutter
will prevent production delays and injuries.
To use the cutter safely, heed the following
warnings and all other warnings that appear in
this manual:
•
To avoid electrocution or other injury,
unplug the machine before attempting
any adjustment, repair, disassembly, or
cleaning.
•
To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.
•
Be careful never to get shortening, water,
or other materials on the floor. If
anything does get spilled on the floor,
mop it up immediately. Materials on the
floor can cause people to slip or fall,
resulting in serious injury or loss of life.
•
To prevent unintentional startup and
possible fire, unplug the machine if there
is a local power outage. When the power
is restored, it is safe to plug the machine
in again.
•
To avoid electrocution, make sure that
all electrical cords are not frayed or
cracked and that they do not pass
through any water or shortening.
•
Make sure that all electrical cords are
routed so that no one will trip over them.
