Belshaw Adamatic Bakery Group
•
•
800-578-2547 • (+1) 253-886-5340
616B TS
MN-1138EN
11
3. Place the
Set Collar with Pin
onto the
column as shown, approximately 2 inches
(51mm) above the
Heater Head
of the
fryer.
•
The pin should point upward. Tighten
the set screw securely. Oil the column
above the set collar with light
machine oil.
4. Slide the
Large Bracket Arm
onto the
Mounting Column
until it rests on the
Set Collar With Pin
.
•
Oil the pin slightly and install the
Nylon Washer
.
5. Place the
Small Bracket Arm
onto the
pin of the Large Bracket Arm.
•
Oil the pin slightly and install the
Nylon Washer
.
6. The
Hopper Base
of the Type N
Depositor will be mounted on the pin of
the
Small Bracket Arm
.
•
The bottom of the depositor should be
1/4" (6 mm) above the rim of the
616B Fryer
.
Summary of Contents for 616B
Page 2: ......
Page 24: ......
Page 27: ...DIAGRAMS PAGE 3 2017 Belshaw Adamatic Bakery Group Auburn WA 98001 USA All Rights Reserved...
