STEP 9
STEP 10
D*8
D*8
E*28
K*8
（1）
Ensure Notch Is Facing Back Of Stand
STEP 9A:
Ensure Cam Locks (Part C) are inserted in holes with open side facing
outwards toward receiver hole for Screw-In pegs (Arrow Side). Place Top Plate
(Part 1) onto the assembled frame. Confirm that all Screw-In Pegs and Dowel Pegs
that were preassembled in STEP 1 are seated correctly. The groove on the underside
of the Top Plate should be seated completely on the Upper Back Panel. Turn the
Cam Locks (Part D) clockwise to tighten.
Top Plate
Cam
Lock
Cover
STEP 9B:
Cover all Cam Locks with
Cam Lock Covers (Part E)
E*28
STEP 10:
Attach Upper and Lower Back Panels to the
Inner Supports using (8)
Long Flat Head Screws
Long Flat Head Screws
