STEP 7
STEP 8
D*4
（9）
（10）
STEP 7:
Carefully place frame into an upright
position. Place the Lower Rear Panel (Part 9) into the
grooves on the Left & Right Side Panels and slide down
into the groove on the Bottom Plate. Once seated place
the Upper Rear Panel (Part 10) into the grooves on the
Left & Right Side Panels and slide down until it meets
the Lower Rear Panel.
STEP 8:
Ensure Cam Locks (Part D) are inserted in holes with
open side facing outwards toward receiver hole for Screw-In
pegs (Arrow Side). Slide Inner Supports (Part 11) onto Long
Screw-In Pegs on the bottom plate ensuring that the Front
Fascia are facing Left and Right (See Diagram). Turn the Cam
Locks (Part D) clockwise to tighten.
Long Screw-In Pegs
Slide Down
Slide Down
Long Screw-In Pegs
Ensure Inner Support Fascia is
Facing Right
Ensure Inner Support Fascia is
Facing Left
