STEP 5
STEP 6
J*8
F*2
D*4
（2）
（2）
（5）
（6）
STEP 5:
Attach Bottom Support Feet (Part F) onto pre-
marked holes on Bottom Plate using (8)
Short Flat Head
Screws
(Part ) J
Bottom Plate
Bottom Support Feet
Short Flat
Head Screws
STEP 3:
Ensure Cam Locks (Part D) are inserted in holes with open side facing outw
a
rds
toward receiver hole for Screw-In pegs (Arrow Side). Insert Long Screw-In Pegs (Part B) at
the bottoms of the Left Side Panel (Part 6) and Right Side Panel (Part 5) into the Bottom
Plate (Part 2) and Turn Cam Locks clockwise to tighten. Ensure Dowel Pegs (Part A) are
fully seated when tightened.
Note: Ensure Groove in Bottom Plate (Part 2) faces the rear and aligns with the grooves in
the Left & Right Side Panels.
