Chapter 1: System Overview
1-4
graphical display with touch pad keys. The display shows status and alarm messages at
the top and middle and contains the touch keys at the bottom.
CONTROL PANEL SUMMARY
Status Display:
•
Flow Rate in ml/min
•
Volume Infused, in liter
•
Heated Fluid Temperature, Tpump, in ºC
•
Patient Temperature, T1, in ºC
•
Patient Temperature, T2, in ºC
•
Patient Temperature, T3, in ºC
•
Patient Temperature, T4, in ºC
•
Pressure in the Fluid Line in mmHg
•
Target Temperature
▲
in ºC
•
Target Temperature
▼
in ºC
Function Keys
: The keys that control all system functions are displayed on the screen.
The screen is changed each time a function key is pressed. Only keys
that are relevant to the desired function are presented. The active key is
highlighted.
There are three (3) different levels of sensitivity: Fast, Medium, and Slow.
The key sensitivity is set at the factory to medium but can be adjusted by
the operator in SERVICE MODE.
See Chapter 4 for ‘Key Rate’ sensitivity setup.
Alarm Display
: Graphical alarm messages indicating where errors have occurred and
suggested operator action.
VACUUM REGULATOR
Display:
0 to -160 mmHg Analog gauge
Control:
Multi-turn knob
