Bellwave BSM-856, User Manual

Page: 10 / 31

-10-
User’s Manual (preliminary)
O0 Causes the MT2 to transition from online command state to online state.
Use of the digit ‘0’ is optional (see EIA/TIA-602).
3.3.2
Basic Result Codes
Table 2.1.2-1 specifies the Basic Result Codes to be supported for the CDMA data
services. Exceptions to EIA/TIA-602 are indicated in Table 2.1.2-1 by square brackets.
Default settings are shown in bold.
The ERROR result code shall be returned for all commands, which do not comply with
the syntax rules of 5.1 of EIA/TIA-615, or Section 5 of EIA/TIA-602.
Numeric Verbal Description
Async
& Fax
Packet
Data
STU III
0 OK Command executed. R R R
1 CONNECT Entering online state. R R R
2 RING
Alerting signal received
from network.
R N/A N/A
3
NO
CARRIER
Unable to activate the
service.
R R N/A
4 ERROR
Command not recognized
or could not be executed.
R R R
6
NO
DIALTONE
No dial tone detected
within time-out period.
R N/A N/A
7 BUSY
Reorder (Busy signal)
received.
R R N/A
8
NO
ANSWER
Five seconds of silence
not detected after ring
back when @ dial
modifier is used.
R N/A N/A