Belltech OND-9005 Manual Download Page 2

Page: 2 / 4

GREEN LED

Slow flashing

Standby

Continuously on

Program mode

Flashing

Program ongoing

Off

The unit is operating

RED LED

Continuously

Alarm input activated, but no telephone number
programmed.

Flashing

After dialling each telephone number 16 times, but no
acknowledgement.

BUZZER

Short beeps

Long beep

Incorrect operation

OPERATION CODES

Program mode

Press: * 5 *
The green LED will light up, and two shorts beeps are heard from the buzzer
(=OK).

Summary of Contents for OND-9005

Page 1: ...er dialling each telephone number 16 times it will give up and make indication by the red LED The alarm dialler will in the pre recorded speech identify itself using a digit 1 9 ID code as set by the...

Page 2: ...Continuously on Alarm input activated but no telephone number programmed Flashing After dialling each telephone number 16 times but no acknowledgement BUZZER Short beeps OK Long beep Incorrect operat...

Page 3: ...activate the alarm End by pressing 5 Press the memory position 1 14 to store the number alarm input end by pressing the green LED will stop flashing and to be continuously on 6 To program next number...

Page 4: ...the program mode alternatively program Telephone numbers Alarm input C2 above or ID speech program E2 above ACKNOWLEDGEMENT OF AN ALARM A On the keyboard Press the digits B By telephone When by teleph...

Brands by name