BellSouth MH9932, Installation Instructions & Owner'S Manual

Page: 22 / 64

22
Storing Numbers
1. Be sure the BASE UNIT IN USE indicator is off and
the HANDSET is in STANDBY mode.
2. Press the MEMO button.
3. Select the index number, use the TELEPHONE
KEYPAD button (0~9) or the or button.
4. Press the EDIT button.
To erase digits, press the DELETE button.
To add digits, use the TELEPHONE KEYPAD.
5. Dial the telephone number you want to store.
6. Press the SAVE button.
7. Press the MEMO button to go back to STANDBY mode.
8. Write the name of the person you will be calling with that number next to
the corresponding index number on the telephone number label.
9. Repeat steps 1 through 8 for other telephone numbers.
A total of 10 telephone numbers can be programmed in memory.
NOTE
:
While storing or editing numbers you can change any number by
using the
or
and DELETE buttons.
IMPORTANT
:
The maximum number of digits that can be stored for any phone
number is 16 in PULSE or TONE mode. The maximum number of digits for mixed
(Tone and Pulse in combination) dialing is 15. If you are using a switchboard system
to access an outside line (such as an 8 or 9), press the RE/PA button to store a
pause.
Previously stored number
Index Number (1-10)
e.g.
Cordless Telephone Operation
MEMO
EDIT
index number key 1.
EXAMPLE:
To store the number 555-1212 under the index number 1 on the keypad:
1 - Press the button. 5 - Press the SAVE button.
2 - Press the dial number 1 button. 6 - Press the button.
3 - Press the button. 7 - You have stored 555-1212 under
4 - Dial 5551212.
MEMO