Cordless Telephone Operation
Preparing for Use
Before you can use your cordless telephone, you must charge the HANDSET for 12 hours.
Failure to do so will require recharging of the BATTERY PACK more often. See more
information on the BATTERY PACK.
1. Place
the
HANDSET
on the
BASE UNIT
for 12 hours.
2. After 12 hours, remove the
HANDSET
from the
BASE UNIT.
NOTE:
Depending on the frequency of use, once the
HANDSET
is fully charged, it remains functional for
approximately 4 hours of continuous use and approximately 5days when the
HANDSET
is off the
BASE UNIT
in STANDBY mode.
IMPORTANT
In order to keep all HANDSET synchronize all the
times, the function of charge, channel changes…etc.
will take longer time.
NO LINE Indicator
This telephone checks for an active TELEPHONE LINE
connection. If “NO LINE” appears on the LCD Screen,
when the HANDSET is in STANDBY mode, no calls can
be made or received from this telephone. Check that
the TELEPHONE LINE CORD plugs are connected to
the wall TELEPHONE JACK and the BASE UNIT
TELEPHONE LINE CONNECTION JACK. If “NO
LINE” continues to be displayed, check that the other
phones in the house are working. If none of the
phones work, contact your local phone company.
Receiving Calls
1. When the phone rings lift the any one of the
HANDSET and press the
button. The
HANDSET LCD Screen will display “CALLS” and
“TALKING”, and the BASE UNIT IN USE LED
indicator will light up.
2. Start your conversation.
3. To end your conversation, either press the
button or place the
HANDSET
on the
BASE
UNIT
. If you place the
HANDSET
on the
BASE
UNIT
CHARGE CRADLE, you activate the
automatic STANDBY feature.
Cordless Telephone Operation
NOTE
:
1. The Call Timer will start to count once you press the
button.
2. The LCD Screen emits light for 5 seconds every time you press any buttons on the
HANDSET
.
3. When “CALLS” appears on the LCD Screen, it means that the HANDSET is off-hook (connected
to the telephone line).
Minutes
Seconds
Channel
Placing Calls
1. Press the
button, the Call Timer starts to
count. The HANDSET LCD Screen will display
“Calls”, and “Talking”, and the BASE UNIT IN
USE LED indicator will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your call, press the
button again or place the HANDSET on
the BASE UNIT.
OR
1. Dial the phone number.
2. Press and hold down the DIAL 7
or the
DIAL 10
or the DIAL 1+
button.
The BASE UNIT IN USE LED indicator will light
up.
3. When you have finished with your call, press the
button again or place the HANDSET on
the BASE UNIT.
7
Ϡ
10
OPER
talk
talk
talk
talk
talk
talk
1+
#
CALLS
00
MIN
1
SEC
14
0
