Resetting the Answering System
After connecting your phone, press and hold down the
button for at least 3 seconds.
Release the button and the unit will
“
beep
”
. Your unit will now reset itself. Then your unit will
announce,
Please enter new time and record your announcement.
You can now set the
day/time and record your new announcement. See the details in the following paragraphs.
NOTE
:
If the Answering System stops functioning or is not functioning normally, unplug and
then plug the AC ADAPTER into its power source. Then follow the procedure in the
preceding paragraph to reset the Answering System.
Setting the Day/Time Stamp
Press and hold down the
button until you hear the announcement
Time is off, please
enter new time.
Then enter the current day and time.
1.
Day Setting
Press and hold down the
button. Release the button when the desired day is
announced.
2.
Hour Setting
Press and hold down the
button. Release the button when the desired hour is
announced.
3.
Minute Setting
Press and hold down the
button. Release the button when the desired minute is
announced.
Press the
button to confirm the selected day and time. The system will announce the day
and time.
You must set the Day and Time in order to have a correct Day/Time stamp at the end of each
incoming message. Anytime you have a power failure or power interruption, you must reset the
Day and Time.
set
min
set
stop
28
Answering System Operation
