BellSouth E911, Owner'S Manual

Page: 37 / 107

CG-EWCG-001 Wireless E911 Guide
Issue 3, January 6, 2004 TN Database Updates
Pseudo-ANI records that are not geographically correct for the E911 selective routing tandem may result
in "NO RECORD FOUND" or a wrong ALI display due to improper NPA translation.
5.4 Instructions for NXX Table Update Form
Table C Instructions for NXX Table Update Form
Instructions for NXX Table Update Form
ACTION CODE: Circle the CODE that reflects the purpose of the form being
submitted:
A - ADD Add new information to an existing account, i.e. an additional
NXX
C - CHANGE Change information previously submitted, i.e. Contact Name,
Phone, etc.
N - NEW New Request. Circle NEW if this is the first request OR if
submitting information for a new state.
COMPANY NAME: Enter the Wireless Carrier company name.
COMPANY
ADDRESS: Enter the address to be used for correspondence on data issues.
CONTACT NAME: Enter the name of the person responsible for data issues.
CONTACT PHONE
NUMBER: Enter the full telephone number of the person responsible for data
issues.
TELCO ID / OCN: Enter the four(4) digit numeric Telco ID or Operating Company
Number issued by BELLCORE.
NENA CO.
IDENTIFIER: Enter the 3-5 character Company ID code registered with NENA
(National Emergency Number Association)
EFFECTIVE DATE:
Enter the anticipated date that you will begin sending database
updates. Please note that this form must be submitted no later
than three(3) weeks prior to the implementation of testing, not
submission of data.
FAX NUMBER: Enter the full fax telephone number of the person responsible for
data issues. Error reports and data correspondence will be faxed
to this number.
SERVICE REQUEST
FOR: Circle the state where service will be offered. Please use a
separate form for each state. (SF = South FL, NF = North FL)
- continued -
Page 27