G
ett
in
g s
ta
rte
d
Installation
To register your accessory handsets
Your phone comes with a handset which is already registered as
Handset 1 . Your phone can operate up to four handsets, to order
additional handsets call the supplier .
1 . After charging the battery, the screen will display:
2 . On the base unit, press
MENU/SEL
, then scroll to
DISPLAY BASE
ID
, press
MENU/SEL
3 . Enter the 15 digit base unit ID code, if you make a mistake, press the
DELETE/MUTE
key to backspace (delete characters), then enter
the correct information .
4 . Press
MENU/SELECT
to complete the registration process .
5 . Once a valid base ID code has been entered, the display will go
blank for a second or two, and then show:
6 . If the base accepts the new handset, after several seconds the new
handset will show:
Re-register existing handsets to a new base
1 . Install your new base unit, the handset(s) will display
SEARCHING…
,
press and hold the
MENU/SELECT
button for two seconds .
2 . The handset will display:
3 . Follow steps 2 through 6 in
To register your accessory handsets
,
above .
ENTER BASE ID
###############
SEARCHING...
HANDSET 2
ENTER BASE ID
###############
SEARCHING...
• The 15-digit base
ID code may
contain numbers
and characters,
including 0
through 9 and * .
Make sure you
enter all 15 digits .
• If you do not
enter the correct
digit sequence,
you will hear an
error tone . Press
DELETE/MUTE
key to backspace
to erase a
character(s) and
carefully re-enter
the base ID code .
