Bellman & Symfon BE9024 Installer'S Manual Download Page 13

Page: 13 / 14

Technical information

Power supply

Battery power: 2 x 1.5 V AA (LR6) lithium or alkaline batteries.

Power consumption

Active < 70 mA, Idle position < 400 μA

Operating time

Alkaline ~ 6 months, Lithium ~ 1 year

Activation

Via the test buttons, microphone or a contact mat via the ext trig

Radio frequency

315 MHz, 433.92 MHz or 868.3 MHz depending on region

Coverage

50 - 250 m depending on radio frequency. Coverage is reduced by
walls, large objects and other radio transmitters.

Number of radio keys

64 as standard. Up to 256 with optional software.

Additional information

Security

Always make sure the baby monitor is out of the child’s reach.

Never place the baby monitor in the child’s crib or playpen.

Usage and storage

For indoor use only. Temperature: 15°- 35° C. Rel. humidity: 5% - 95%.

Maintenance and cleaning

Maintenance free. Clean with a dry cloth. Don’t use household cleaners,
aerosol sprays, solvents, alcohol, ammonia, or abrasives. Not reusable.

Warranty and service

If your baby transmitter appears to be damaged or doesn’t function
properly, follow the advice in this booklet and the online resources. If
it still doesn’t function properly, contact your retailer for information
about obtaining warranty service.

Hereby, Bellman & Symfon de-
clares that this Baby monitor is
in compliance with the essential
requirements and other relevant
provisions of directives:

R&TTE 1999/5/EC, LVD 1973/23/EC, EMC 1989/336/EC,
MDD 1993/42/EEC.

Use and disposal of batteries

Replace only with the same or equi-
valent type recommended by the
manufacturer. Please dispose of old,
defective batteries in an environ-

mentally friendly manner in accordance with the
relevant legislation in your country.

FCC compliance statement

This device complies with Part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

this device may not cause harmful

interference, and (2) this device

must accept any interference re-

ceived, including interference that

may cause undesired operation.

Warning:

Changes or modifications

to this unit not expressly approved

by the party responsible for compli-

ance could void the user’s authority

to operate the equipment.

Note:

This equipment has been

tested and found to comply with

the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to pro-

vide reasonable protection against

harmful interference in a residential

installation. This equipment gener-

ates, uses and can radiate radio fre-

quency energy and, if not installed

and used in accordance with the in-

structions, may cause harmful inter-

ference to radio communications.

However, there is no guarantee that

interference will not occur in a par-

ticular installation. If this equipment

does cause harmful interference to

radio or television reception, which

can be determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between

the equipment and receiver.

• Connect the equipment into an

outlet on a circuit different from

that to which the receiver is con-

nected.

• Consult the dealer or an expe

rienced radio/TV technician for

help.

For a complete Declaration of Con-

formity please contact the Bellman

& Symfon European office.

Industry Canada statement

This device complies with Industry

Canada Licence-exempt RSS-210.

Operation is subject to the follow-

ing two conditions:

(1) this device may not cause inter-

ference, and (2) this device must

European office

Bellman & Symfon Europe AB
Södra Långebergsgatan 30
421 32 Västra Frölunda
Sweden
Phone: +46 31 68 28 20
E-mail: [email protected]

Asia Pacific office

Bellman & Symfon Asia Ltd.
1115-16, Main Tower, Int’l Hotel
339 Huanshi Dong Rd
Guangzhou, China, 510095
Phone: +86 20 8318 2950
E-mail: [email protected]

accept any interference, including

interference that may cause unde-

sired operation of the device.

Le fonctionnement de cet équipe-

ment est soumis aux conditions

suivantes:

(1) l’équipement concerné ne doit

pas causer d’interférences, et (2) il

doit accepter toute interférence

reçue, y compris les interférences

risquant d’engendrer un fonction-

nement indésirable. Cet appareil