Bellman & Symfon BE9024, Installer'S Manual

Page: 12 / 14

89
If Try this
Two orange lights
appear every 10s
• Change the batteries. Only use 1.5 V AA (LR6) lithium
or alkaline batteries.
A green light
appears on the
baby monitor but
the receiver is not
activated
• Check the baby monitor’s and the receiver’s batteries
and plugs.
• Move the receiver closer to the baby monitor.
• Check that the baby monitor and the receiver are set
to the same radio key. For more information, read the
section
Changing the radio key
.
The baby monitor is
not activated even
though the baby is
crying
• Move the baby monitor closer to the baby or increase
the microphone’s sensitivity, see Settings .
• Please note: Always make sure the baby monitor is
out of the child’s reach. Never place the baby moni-
tor in the child’s crib or playpen.
Trouble shooting
90
If Try this
The baby monitor is
activated too easily
• Reduce the sensitivity or move the baby monitor
further away from the crib, see Settings .
The baby monitor is
activated too fast
• Increase the delay.
For more information, read the section Settings .
The baby monitor is
activated too slow
• Reduce the delay.
For more information, read the section Settings .
The receiver is activated
for no reason
• There is probably another Visit system nearby that
triggers your system. Change the radio key on all
units, see Changing the radio key .