Bellman & Symfon BE1442, Installer'S Manual

Page: 9 / 39

7
For further information, please refer to the Installer’s guide .
Troubleshooting in brief
If Try this
Nothing happens.

Check that the power supply unit is connected correctly.

Check that there is current in the wall socket.
The receiver is not activated.

Check the battery in the transmitters.

Check that the receiver is not placed too far away from the
transmitters by moving it closer to the transmitters.

Check that the receiver is set to the correct radio key. For
further information see Function/Radio key.
The receiver signals when no
transmitter is activated.

Change the Radio Key on all units in the system. For further
information see Appendix/Radio key.
EN
BE1444_005MAN002-433-Visit-Flashreceiver.indb 9 2017-09-06 09:33:54