Bellini BTPA700, Manual

Page: 5 / 12

5
Getting Know Your
Pasta Maker
Congratulations on purchase of your new Pasta
maker.
Before first using your new Pasta Maker, it is most
important that you read and follow the instructions
in this use and care booklet, even if you feel you
are familiar with this type of appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a
safe and convenient place to keep this booklet
handy for future reference.
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.
Before First Use
Remove and safely discard any packaging
material and promotional labels.
There may still be some production residue on the
device. Clean the device thoroughly before you
first use it.
Assembly Your Pasta
Maker
Place the Pasta maker on a dry, level surface
near and electrical outlet. Ensure the switch are
all OFF(O) position, Do not plug in.
Insert the Mixing container horizontally on the unit
base by thoroughly pushing it to the back of unit
base.
Insert Auger into pasta extrusion chamber.
Slide the mixing blade onto the Auger shaft by
aligning the key on the mixing blade with the
groove on the Auger shaft.
Insert the Mixing blade /Auger assembly through
the aperture of the mixing container and align
Auger shaft to engage with drive cog of the
appliance base.