Bellini BTJX885, Manual

Page: 7 / 12

7
Maintenance
Regular maintenance of your appliance will
keep it safe and in proper operational order.
Before Cleaning
When not in use or before cleaning, always
disconnect the appliance from the mains supply.
Cleaning
Always ensure that the Juice Press is turned
off and the power cord is unplugged from the
power outlet before cleaning, disassembling or
assembling and storing the appliance.
1. Immediately after each use, use the nylon
brush to thoroughly clean the fine mesh holes
of the strainer. Brush the inside of the strainer
under running water, holding it up towards
the light to ensure the fine mesh holes are not
blocked.
2. Use the filter brush provided with the Juice
Press. This brush has been specially designed
to clean the strainer. Simply place the strainer
inside the brush and under running water
twist the brush left and right to remove the
pulp from the strainer. You will need to use
the small brush provided to clean the inside
of the strainer, this should also be done under
running water.(see Fig.12)
Fig. 12
If the holes are blocked, soak the filter basket
in hot water with 10% lemon juice to loosen the
blocked holes.
Tips:
If the strainer cannot be cleaned immediately
after use, soak the filter basket in hot soapy
water immediately after juicing is complete. If
pulp is left to dry on the strainer, it may clog
the fine mesh holes, thereby lessening the
effectiveness of the Juice Press. Do not soak the
strainer in bleach.
3. Wash the juice bowl, auger, strainer holder,
pulp cup and juicing cup in warm soapy
water with the small nylon brush or a soft
cloth. Rinse and dry thoroughly.
Note:Do not place any part of the
Juice Press in the dishwasher.
Tips:
Discoloration of the plastic parts may occur
with brightly colored fruit and vegetables. To
help prevent this, wash parts immediately after
use. If discoloration does occur, the plastic
parts can be soaked in 10% lemon juice and
water or they can be cleaned with a non
abrasive cleaner. Do not soak the filter basket
in bleach. Do not soak the motor base.
4. Wipe the motor base with a soft damp cloth
and dry thoroughly. Do not use abrasive
scouring pads or cleaners when cleaning
the motor base as these may scratch the
surface. Wipe any excess food particles
from the power cord.
Damage Check
Always check that the appliance is in good
working order and that all removable parts are
secure. Check the power supply cord and plug
regularly for cuts or damage.
Store in a Safe Place
When not in use store your appliance and all
its accessories and instruction manual in a safe
and dry place.
Specification
Voltage: 220-240V~
Frequency: 50Hz
Power Input: 400W
Protection Class: II