8
Installation and connection
▲
Material damage!
The door and/or handle must not be used for lifting or moving the appliance.
For installation the appliance must be connected in accordance with all local gas and/or
electrical regulations.
Carry the appliance with at least two persons.
Use the slots or wire handles located at both sides to move the appliance.
Connection to the mains supply
This appliance must be earthed!
Bellini
shall not be held responsible for any damage caused by using
the appliance without an earthed socket. Risk of electric shock, short circuit or fire by
unprofessional installation! The appliance may be connected to the mains supply only
by an authorized qualified person and the appliance is only guaranteed after correct
installation.
Risk of electric shock, short circuit or fire by damage of the mains lead! The mains lead
must not be clamped, bent or trapped or come into contact with hot parts of the
appliance. If the mains lead is damaged, it must be replaced by a qualified electrician.
The mains supply must correspond to be data specified on the rating plate of the
appliance. The appliance mains cable must correspond to the specifications and the
power consumption.
Risk of electric shock!
Before starting any work on the electrical installation, please disconnect the
appliance from the mains supply.
Installation
1
.
Slide the oven through the cabinet aperture, align and secure.
2
.
Fix your oven with the 2 screws and washers as indicated in the figure.
Final check
1. Connect the appliance to the mains supply and switch on the mains supply.
2. Check function.
