background image

 
 

 

 

WARRANTY

  

1.1   In this warranty:  

1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the Competition and Consumer 

Act 2010;  

1.1.2 Company means GSM Retail Australia Pty Ltd ABN 53 007 682 475 of 142-144 Fullarton Road, Rose  

Park SA 5067. Telephone 1300 373 199. Email

 [email protected]

;  

1.1.3 Consumer 

means a “consumer” as that term is defined in Section 3 of the Australian Consumer Law 

as the original purchaser of a Bellini product;  

1.1.4 Consumer Guarantees means the guarantees under the Australian Consumer Law;  
1.1.5 You means the Consumer.  

1.2 Nothing in this warranty affects any person’s rights under the Australian Consumer Law. The benefits to 

any  Consumer  under  this  warranty  are  in  addition  to  the  rights  and  remedies  available  under  any 
Consumer Guarantees.  

1.3 Subject to the other clauses of this warranty, the Company warrants to the Consumer that the Bellini product 

will be free of manufacturing defects and will perform to the Company’s specifications. 

 

1.4   The benefit of this warranty extends only to the Consumer as original purchaser of a Bellini product, which 

is installed in a domestic household area.   

*The  in  Home  warranty  does  not  apply  to  Commercial  and  or  industrial  usage.  *

Please  see  1.7.7  for 

additional information 

 

1.5 This warranty commences on the date of purchase of the Bellini product by the Consumer and continues 

for the benefit only of the Consumer until the expiry of three (3) year (Warranty Period).  

1.6 If within the Warranty Period a manufacturing defect is discovered in the Bellini product or it fails to perform 

to 

the Company’s specifications as a result of some defect in materials, components or workmanship 

(Defect) then the Company will, at its option, repair the Bellini product or supply a replacement Bellini 
product free of charge. A replacement Bellini product may differ from the original product purchased by 
the Consumer.  

1.7   This warranty will not apply to any Bellini product:  

 1.7.1  

Installed by any person other than a qualified tradesperson; or  

 1.7.2  

Subjected to misuse, neglect, negligence or accidental damage; or  

 1.7.3  

Operated in any way contrary to any operating or maintenance instructions; or  

 1.7.4  

Improperly handled, installed or maintained; or  

 1.7.5  

Altered or modified prior to or after installation; or  

1.7.6       Damaged directly or indirectly by power surges, electrical storm damage or connection to incorrect 

power supply  

1.7.7       Industrial and or Commercial usage is inclusive of staff areas in office/ shop environments, hotel/ motel 

or other similar accommodation or rental type properties including Bed and Breakfast establishments. 

 

  

The Australian Consumer Law requires the inclusion of the following statement 

with this warranty: 

 

Our goods come with guaranteed that cannot be excluded under the Australian Consumer Law. You are entitled to a 

replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. 

 

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure 

does not amount to a major failure. 

 

    
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY THE CONSUMER 

 

MUST CALL 1300 373 199 (AUSTRALIA) OR 0508 123 108 

 

(NEW ZEALAND) TO CONNECT TO THE NEAREST AUTHORISED CENTRE 

 

Summary of Contents for BIA64EGP





















Reviews: