Installation
5
2. Placement of the Induction Hob
Your appliance can be installed above a drawer, cupboard with a door or an oven.
Note: The electronic circuits of the induction hob must be cooled by a flow of fresh air as shown in the diagram
below and the Important Note below must be carefully adhered to.
Important:
Your induction hob needs an air inlet at the rear of the cupboard and an air outlet at the front of the cupboard.
-
To install your appliance above drawer
There must be adequate ventilation space
between the base of the Induction hob and the
drawer positioned directly below. The greater
the distance between the hob and the drawer
below it, the better the hob will function.
- To install your appliance above cupboard
with door
The ventilation holes of the hob should ideally have a
clear path to the cupboard door, this can be achieved
without alteration if the cabinet compartment cross bar is
small and distant from the ventilation holes.
If the Cabinet compartment cross bar is large and
obstructing the venting holes of the hob, make a beveled
cut in the cross bar (As shown below) to achieve
adequate clearance around the venting holes.
Summary of Contents for BI63T
Page 14: ...12 NOTES...
