background image

Safety instructions 

This User Instruction Manual contains important information, including safety & 

installation points, which will enable you to get the most out of your appliance. 

Please keep it in a safe place so it is easily available for future reference; for you or 

any person not familiar with the operation of the appliance. 

 Caution!

 

Do not use the ceramic hob until you

have read this instruction manual.

The ceramic hob is intended for

household use only.

The appliance becomes hot during

operation. Take care not to touch the

hot surface.

Always keep children away from the

ceramic hob.

While in operation, direct contact with

the ceramic hob may cause burns!

Ensure small items of household

equipment, including connection

leads, do not touch the hob as the

insulation material of this equipment is

usually not resistant to high

temperatures.

Do not leave the ceramic hob

unattended when frying. Oils and fats

may catch fire due to overheating or

boiling over.

Do not switch on the hob until a pan

has been placed on it.

Do not put pans weighing over 25kg

on the hob.

Do not use the ceramic hob in the

event of a technical fault. Any faults

must be fixed by an appropriately

qualified and authorised person.

In the event of any incident caused by

a technical fault, disconnect the power

and report the fault to the service

centre to be repaired.

The rules and provisions contained in

this instruction manual should be

strictly observed. Do not allow

anybody who is not familiar with the

contents of this instruction manual to

operate the ceramic hob.

The ceramic hob should not be

cleaned using steam cleaning

equipment.

IMPORTANT: The adjacent furniture

or housing and all materials used in

the installation must be able to

withstand a minimum temperature of

95°C above the ambient temperature

of the room it is located in, whilst in

use.

Any damage caused by the appliance

being installed in contravention of this

temperature limit, or by placing

adjacent cabinet materials closer than

4mm to the appliance, will be the

liability of the owner.

Child Safety 

We strongly recommend that

babies and young children are

prevented from being near to the

appliance and not allowed to touch

the appliance at any time.

If it is necessary for younger family

members to be in the kitchen,

please ensure that they are kept

under close supervision at all times.

4

Summary of Contents for BCA64GK





















Reviews: