background image

Cleaning table 

Type of deposit

 

Remove

 

immediately?

 

Remove when 

the appliance

 

has cooled 

down?

 

What should I use 

to remove the 

deposit?

 

Sugar or food/liquid 

containing sugar

 

Yes

 

No

 

Ceramic hob scraper

 

Tin foil or plastic

 

Yes

 

No

 

Ceramic hob scraper

 

Fat splashes

 

No

 

Yes

 

Ceramic hob cleaner

 

Metallic 

discolouration

 

No

 

Yes

 

Ceramic hob cleaner

 

Water splashes or 

water rings

 

No

 

Yes

 

Ceramic hob cleaner

 

Important! 

The surface of the hob should only be cleaned with warm water and a small 

amount 

o

f washing up liquid.

 

Caution! 

Ensure the heating plate is clean-a soiled zone does not transfer all of the heat. 

Protect the hob against corrosion. 

Switch off the hob against corrosion. 

Do not leave pans with dishes 

containing fats and oils unattended

 on the switched-

on plate; hot fat can spontaneously catch fire. 

IMPORTANT: If your appliance 

does not a

ppear to be operating correctly, 

p

lease

 contact the dealer.

 

DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. 

Please note that if an engineer is asked to attend whilst the product is under guarantee 

and finds that the problem is not the result of an appliance fault, then you may be 

liable for the cost of the call out charge. 

The appliance must be accessible for the engineer to perform any necessary repair. If 

your appliance is installed in such a way that an engineer is concerned that damage 

will be caused to the appliance or your kitchen, then 

they

 will not complete a repair.  

19

Summary of Contents for BCA64GK





















Reviews: