background image

1.8 

You must provide proof of your purchase of the Bellini product and the date of purchase in order to obtain 

the benefit of this warranty. 

1.9 

If you live outside the service area of the Company or one of its service agents, this warranty does not 

cover the cost of transport of the Bellini product for service nor the service agent’s traveling costs to and 

from your home. 

1.10  If you are required to transport the Bellini product to the Company or its service agent, you must ensure it is 

safely disconnected by a qualified tradesman and securely packed and insured. The Company does not 

accept any responsibility for loss or damage of the Bellini product prior to it being received by the Company or 

its service agent. 

1.11  You will be responsible for all costs of returning a Bellini product to the Company and for redelivery of the 

Bellini product by the Company (whether it is the original or a repaired and/or a replacement Bellini product) 

and for any other expenses you incur in claiming under this warranty. 

1.12  The Company or its service agent will examine any Bellini product and if the Company determines that it is 

defective through no fault of the Owner and is otherwise undamaged, the Company will repair or replace the 

Bellini product in accordance with this warranty. 

DO NOT SEND IN THIS WARRANTY 

Fill out the following details and file with your purchase invoice. 

RETAIN & FILE WITH YOUR RECEIPT 

Your Purchase Receipt/Invoice is proof of date of purchase. If you are unable to establish the date of purchase, or if 

the fault is not covered by this warranty, or if the product is found to be in working order, you will be required to bear 

all service call charges. 

GSM Retail Australia Pty Ltd 

 reserves the right to discontinue items, modify designs and change specifications 

without incurring obligation. 

Whilst every effort is made to ensure that descriptions, specifications and other information in this publication is 

correct, no warranty is given in respect thereof and the company shall not be liable for any errors therein. 

Purchased from: 

Co. Name: 

Address: 

Date of Purchase: 

Serial number: 

NOTE: 

Consistent with our continuing product development policy, improvements may have been made 

which render the contents of this packaging slightly different to that shown. 

FOR WARRANTY SERVICE CALL 1300 373 199 (AUSTRALIA) 

OR 

0800 764 912

 (NEW ZEALAND) TO CONNECT YOU TO THE NEAREST 

AUTHORISED SERVICE CENTRE 

Summary of Contents for 0220233

















Reviews: