background image

WARRANTY

 

1.1 

In this warranty: 

1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the Competition and 

Consumer Act 2010; 

1.1.2 

Company 

means 

GSM Retail Australia Pty Ltd 

 ABN 53 007 682 475 of 142-144 Fullarton Road, Rose 

Park SA 5067. Telephone 1300 373 199. Email

 admin@gsm

retailaust

.com.au

1.1.3 

Consumer 

means a “consumer” as that term is defined in Section 3 of the Australian Consumer 

Law as the original purchaser of a Bellini product; 

1.1.4 

Consumer Guarantees 

means the guarantees under the Australian Consumer Law; 

1.1.5 

You 

means the Consumer. 

1.2 

Nothing in this warranty affects any person’s rights under the Australian Consumer Law. The benefits to 

any Consumer under this warranty are in addition to the rights and remedies available under any 

Consumer Guarantees. 

1.3 

Subject to the other clauses of this warranty, the Company warrants to the Consumer that the Bellini 

product will be free of manufacturing defects and will perform to the Company’s specifications. 

1.4 

The benefit of this warranty extends only to the Consumer as original purchaser of a Bellini product which 

is installed in a domestic household area. 

*The in Home warranty does not apply to Commercial and or industrial usage. *

Please See 1.7.7 for additional

information 

1.5 

This warranty commences on the date of purchase of the Bellini product by the Consumer and 

continues for the benefit only of the Consumer until the expiry of three (3) year 

(Warranty Period)

1.6 

If within the Warranty Period a manufacturing defect is discovered in the Bellini product or it fails to perform 

to the Company’s specifications as a result of some defect in materials, components or workmanship 

(Defect) then the Company will, at its option, repair the Bellini product or supply a replacement Bellini 

product free of charge. A replacement Bellini product may differ from the original product purchased by the 

Consumer. 

1.7 

This warranty will not apply to any Bellini product: 

1.7.1 

Installed by any person other than a qualified tradesperson; or 

1.7.2 

Subjected to misuse, neglect, negligence or accidental damage; or 

1.7.3 

Operated in any way contrary to any operating or maintenance instructions; or 

1.7.4 

Improperly handled, installed or maintained; or 

1.7.5 

Altered or modified prior to or after installation; or 

1.7.6 

Damaged directly or indirectly by power surges, electrical storm damage or connection to incorrect 

power supply 

1.7.7 

Industrial and or Commercial usage is inclusive of staff areas in office/ shop environments, hotel/ 

motel or other similar accommodation or rental type properties including Bed and Breakfast 

establishments.  

   IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY THE CONSUMER 

MUST CALL 1300 373 199 (AUSTRALIA) OR 

0800 764 912

(NEW ZEALAND) TO CONNECT TO THE NEAREST AUTHORISED CENTRE 

The Australian Consumer Law requires the inclusion of the following 

statement with this warranty: 

Our goods come with guaranteed that cannot be excluded under the Australian Consumer Law. You are entitled to a 

replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. 
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure 

does not amount to a major failure. 

Summary of Contents for 0220233

















Reviews: