Installation Instructions
The back of the cooker has a slot for engagement of a
stability bracket, which can be obtained from a reputable
plumbers merchant or DIY store. The leaflet included with the
bracket should be read in conjunction with the following
instructions:
Push cooker to its intended position.
Draw pencil lines on the floor in line with the front and
left side of the plinth.
Remove the cooker.
Position stability bracket in accordance with diagram
below.
Measure height from floor level to the bottom of the
slot in the back of the cooker.
Add 3mm to the dimension and assemble the stability
bracket to that height. (i.e. from floor level to the
underside of the top member).
Stability
Bracket
8
PENCIL LINE
PLINTH
BRACKET
W ALL
92
m m
410mm
4666200024-01 Belling 135 31/07/2001 2:22 pm Page 8
