background image

EN - 19

illumination.

6.  TROUBLESHOOTING&TRANSPORT

6.1 

troubleShootinG

If you still have a problem with your appliance after checking these basic 

troubleshooting steps, please contact an authorised service person or qualified 

technician.

Problem

Possible Cause

Solution

Oven does not switch 

on.

Power is switched off.

Check whether there is power supplied.

Also check that other kitchen appliances are 

working.

No heat or oven does 

not warm up.

Oven temperature control is incorrectly 

set.

Oven door has been left open.

Check that the oven temperature control 

knob is set correctly.

Oven light (if available) 

does not operate.

Lamp has failed.

Electrical supply is disconnected or 

switched off.

Replace lamp according to the instructions.

Make sure the electrical supply is switched 

on at the wall socket outlet.

Cooking is uneven 

within the oven.

Oven shelves are incorrectly 

positioned.

Check that the recommended temperatures 

and shelf positions are being used.

Do not frequently open the door unless you 

are cooking things that need to be turned. 

If you open the door often, the interior 

temperature will be lower and this may affect 

the results of your cooking.

The timer buttons 

cannot be pressed 

properly.

There is foreign matter caught 

between the timer buttons.

Touch model: there is moisture on the 

control panel.

The key lock function is set.

Remove the foreign matter and try again.

Remove the moisture and try again.

Check whether the key lock function is set.

The oven fan (if 

available) is noisy.

Oven shelves are vibrating.

Check that the oven is level.

Check that the shelves and any bake ware 

are not vibrating or in contact with the oven 

back panel.

6.2 

tranSport

If you need to transport the product, use the original product packaging and carry it using 

its original case. Follow the transport signs on the packaging. Tape all independent parts to 

the product to prevent damaging the product during transport.

If you do not have the original packaging, prepare a carriage box so that the appliance, 

especially the external surfaces of the product, is protected against external threats.

Summary of Contents for DESIGN COLLECTION BDO606BK
























Reviews: